Introduction
Garden Mesh
Plastic Netting / Garden Net
Plastic Bird Netting
Plastic Support Netting / Bean & Pea Nets
Sentree™ Treeguard
Windbreak Fencing Mesh
Insect Mesh
Forestry / Tree Planting
Tree Protection FAQs
Acorn SPIRAL SHELTERS & Guards
Acorn SHELTERGUARD™ Tree Shelters
Acorn TREEGUARD Mesh
Acorn MULCHING Weed Control
 




Shelterguard™ Specification
TREES




Shelterguard™ Specifcation
SHRUBS



Shelterguard™ Fitting Instructions - TREES


Shelterguard™ Fitting Instructions - SHRUBS


 
Acorn SHELTERGUARD™ Tree Shelters
Shelterguard™ tree shelters are manufactured by co-extruding a laminate of 12mm square plastic mesh and a tinted polyethylene lining. The material has been specifically designed to photo-degrade in a two stage process, with the polyethylene lining breaking up first, (once the tree is established enough to no longer require the shelter environment), leaving a free draining netting to continue to provide support and animal browsing protection.

The two stage manufacturing process enables Shelterguard™ to be more versatile than traditional solid tubes tree shelters and means it will be particularly suited to warming climates as the polyethylene liner will degrade quicker in stronger sunlight, leaving a well ventilated mesh tree guard to continue to protect the tree from browsing.

Installation of SHELTERGUARD tree shelters

Acorn Planting Products

Shelterguard™ Plus for Trees
SHELTERGUARD tree shelters supplied 80-100mm diamter for trees

Our Shelterguard™ for trees range consists of four welded tubes nested inside of each other. The diameter range is from 80-110mm and all shelters have ties pre-fitted as standard. We nest our products so that four guards can be shipped together saving delivery and ultimately product costs.

Each shelter is fitted with a moulded top edge lipping to prevent stem abrasion and strengthen the tube. A staggered weld line improves drainage, preventing the tube from filling up with water in heavy rainfalls.

The film, netting and top lipping will photo-degrade and split as the stem of the growing tree expands to fill the tube ensuring that there is no restriction to the trees growth.

  • Material : Recycled Polyethylene Photodegradable
  • Colour : Olive Green, Brown. Black also available
  • Height : 60cm, 75cm, 90cm, 1.2m, 1.5m, 1.8m
  • Diameter : 80-110mm
  • Support : Timber stake recommended
  • Ties : 60cm shelters have one tie pre-fitted and all other sizes have two ties as standard

Shelterguard™ for Shrubs

SHELTERGUARD for shrubs supplied in 3 different nested diameters

Our Shelterguard™ for Shrubs tree shelter range consists of four welded tubes nested inside of each other (We nest our shelters so that four guards can be shipped together saving delivery and ultimately product costs). The diameter ranges are 130-160mm, 150-180mm or 170-200mm. All shrub shelters are 60cm tall and come complete with two pre-fitted ties.

Each shelter is has a smooth top edge (selvedge) to prevent stem abrasion and strengthen the tube. The tree shelter and a staggered weld line to improve drainage, helping to prevent the tubes from filling up with water during heavy rainfall.

The film and netting are all designed to photo-degrade and split as the stem of the growing tree expands to fill the tube.

  • Material:  Recycled polyethylene - Photodegradable
  • Colour:  Olive Green ( Brown & Black also available)
  • Height:  60cm
  • Diameter:  130-160mm, 150-180mm, 170-200mm
  • Support:  Timber stake recommended
  • Ties:  Two ties pre-fitted
Shelterguard™ Plus cut to size
Cut sheets of SHELTERGUARD tree guards

Cut pieces of Shelterguard™ are very versatile as they are available in a much wider range of sizes than pre-formed tubes and make an economical alternative. We can make 9cm, 15cm and 20cm diameter shelters at any height, and 60cm tall shelters to any diameter.

  • Material:  Recycled Polyethylene
  • Colour:  Green, black or brown
  • Height:  60cm to 1.8m (other options on request)
  • Diameter:  9cm, 15cm, 20cm (any dia. on 60cm size)
  • Support:  Timber stake recommended. Two should be used on guards with a diameter over 20cm
  • Fixing:  Ties or staples; available separately
Shelterguard™ on the roll
Rolls of SHELTERGUARD are available

Treeguard and Shelterguard™ on the roll can be used to create economical shelters in a wide variety of sizes.

  • Material:  Recycled Polyethylene
  • Colour:  Green, black or brown
  • Height:  30cm, 45cm & 60cm
  • Roll Length : 50m

Our standard Shelterguard® has a polythene lining with a minimum life expectancy of 3 to 5 years and a netting with a minimum life expectancy of 5 to 7 years.

Biodegradable Shelterguard

Our biodegradable version of Shelterguard™ has been developed following a number of years work including both advanced weathering and field trials (Trials carried out based on UK Climates). This new Bio-shelter, a biodegradable version of our popular Shelterguard™ range has been designed in collaboration with a specialist plastics firm and will function in exactly the same way as our current shelters, ensuring that browsing protection is not compromised, but will begin to biodegrade after about 7 years. Once the guard has split and fallen off the tree, contact with the soil will enable microbes to accelerate their work, gradually breaking down the plastic harmlessly into water, carbon dioxide and biomass.

Please note that information on the testing for the Biodegradeable tree guards has been carried out based on Northern European Climates (UK) and therefore may differ in Australia. Please contact us for further information.

You may also be interested in our other products within our Acorn Planting Products range. Please click on the links below to find out more :

Acorn Planting Products Ltd is a division of Boddingtons Limited, part of the Boddingtons group.