|
|
 |
 |
|
|
 |
|
| |
GrassProtecta™ Grass
Reinforcement Mesh *New* |
|
GrassProtecta™ grass reinforcement mesh is a thick heavy duty plastic polyethylene mesh for grass reinforcement. The new oscillated mesh structure has been designed to add extra slip resistance when compared against the standard straight mesh filament grass protection meshes. GrassProtecta™ grass reinforcement mesh is designed for grass surfaces prone to damage, wear,
rutting and becoming muddy particularly in wet conditions caused by cars, vans, trucks and heavy pedestrian applications. Boddingtons Australia's new
GrassProtecta™ oscillated mesh
structure is designed to increase traction
and improve slip resistance by up to 97% compared
to standard straight oriented meshes. GrassProtecta® grass reinforcement mesh is a cost effective solution for
:
-
Grass car parks
-
Grass areas prone to erosion and wear
-
Overflow grass car parks
-
Pedestrian paths
-
Disabled access routes / Wheelchair
-
Golf buggy / trolley paths
-
Grass driveways
-
Carvan park access and
caravan bays
-
Front lawn parking
-
Fire engine emergency access
|
|
New GrassProtecta™ grass reinforcement mesh is supplied on 2m
x 20m & 1m x 10m rolls in two thicknesses
(11mm & 14mm) as determined by the application
and manufactured from partly recycled UV stabilised
high density polyethylene (Approx 20% recycled polymer)
Installation of GrassProtecta™ is simple;
After mowing / cutting the grass short, the reinforcement net
mesh is unrolled and fixed to the existing grass surface using
either metal U-Pins or plastic pegs. GrassProtecta™ grass protection mesh allows the grass to grow through the plastic mesh apertures, allowing the grass sward to intertwine
with the plastic mesh filaments. This helps create a strong reinforced grass surface capable of
withstanding vehicle loads (cars & trucks), limiting damage and
reducing soil compaction and becomes invisible from view once the grass has fully grown through. GrassProtecta™ grass stabilisation mesh can
alternately be installed onto newly landscaped areas before seeding. Full installation
and design specification is available from Boddingtons
technical team or dowloaded on the left of this page.
|
|
|
GrassProtecta™ mesh
after installation |
Immediately the grass will start to grow throught the mesh apertures |

GrassProtecta™ is ideal for golf buggy
routes, trolley paths and grass overflow car parks
|
Boddingtons Australia
advise that newly installed GrassProtecta™ slip
resistant grass surfaces should be left cordoned off from the public until the grass has grown through the plastic
net apertures, thus creating a strong interlock between the plastic mesh and the grass sward – normally a few weeks during
the growing season is acceptable but this will be dependant on growing rates and the season. If the surface is used
immediately grass growth may take a longer period
of time due to early wear before the grass has been reinforced. |
GrassProtecta™ grass
reinforcement grid provides :
-
High
level of grass reinforcement – up
to 8 tonnes per axle (imposed load)
-
Ideal
for permanent or temporary applications
-
Fast
and cost effective installation compared
to grass pavers / plastic paving grids
-
Up
to 97% improved slip resistance compared
to the standard grass protection mesh
-
Quick and easy to install as supplied on large rolls
-
Available from stock at Boddingtons Australia
|
Mesh
Structure

|
| GrassProtecta™ can
be used in Source Control applications as part
of Sustainable Urban Drainage System. It is a greener alternative to impermeable paved
surfaces where natural grassed traffic routes and
driveways are preferred or where planning restrictions
apply and particularly where cost savings are being considered. |
Natural
grass surface returns in just a few weeks after installation:
|
|
|
GrassProtecta™ Grass Protection Mesh unrolled for fixing
|
Grass growth occurs quickly through the mesh apertures |
Very quickly the mesh will disappear from view as the grass starts to intertwine with the mesh filaments |
| |
|
|
Please note that with all plastic
products, the product can become slippery
on damp or wet conditions if used before
any grass has grown.
|
|
|
 |
 |
 |
| Size |
Grade |
Colour |
|
Weight |
Material |
Thickness |
Part
No. |
| 2mx20m |
Standard |
Green |
3:1 Ratio Diamond:Oval |
1.2kg/m |
HDPE |
11.5mm |
055876 |
| 1mx10m |
Standard |
Green |
3:1 Ratio Diamond:Oval |
1.2kg/m |
HDPE |
11.5mm |
055869 |
| 2mx20m |
Heavy |
Green |
3:1 Ratio Diamond:Oval |
2kg/m |
HDPE |
14mm |
055470 |
| 1mx10m |
Heavy |
Green |
3:1 Ratio Diamond:Oval |
2kg/m |
HDPE |
14mm |
055852 |
If your requirements
are only to reinforce grass that will be used for
occasional vehicle
parking and heavy pedestrian use, GrassProtecta™ Grass
Protection Mesh would be the
ideal solution, but turf
reinforcement mesh may also be suitable. We
can also offer our
Bodpave™ Grass Pavers for reinforcing
grass areas (grass car parks) and for gravel retention. (driveways and access roads)
|
 |
|
|
|
 |
| |